Written by the Decomica Design Team — updated June 2026. Decomica sells high-quality reproductions of iconic mid-century designs, not licensed originals.
The Tall version of the Eames Lounge Chair replica is designed for sitters roughly 185 cm (6’1″) and above. It is wider in seat depth (~60–61 cm vs. ~54 cm standard), taller in the backrest (~88–90 cm vs. ~82–84 cm), and gives taller occupants the lumbar and head support the standard model can’t provide. If you’ve tried the standard and found it too short in the back, or if you’re tall and considering your first Eames replica, this guide is for you.
The Eames Lounge Chair was designed by Charles and Ray Eames in 1956. Charles Eames was around 5’10”. The standard chair proportions reflect that era’s average adult frame. For decades, taller buyers had no option but to accept the standard model. The Tall version — now offered by both licensed manufacturers and quality replica makers — corrects this with specific dimensional changes that genuinely improve fit and comfort for taller sitters.
Browse the full range including Tall configurations in our Eames Lounge Chair collection.
Standard vs. Tall: The Exact Dimensional Differences
The changes between standard and Tall are targeted — the chair’s visual silhouette and width remain essentially the same. What changes is the geometry that directly affects fit for a taller body:
| Dimension | Standard | Tall / XL | Difference |
|---|---|---|---|
| Overall height (backrest) | 82–84 cm | 88–90 cm | +6 cm |
| Overall depth | 82–85 cm | 90–96 cm | +8–11 cm |
| Seat depth | ~54 cm | ~60–61 cm | +6–7 cm |
| Seat height (from floor) | 37–39 cm | 37–39 cm | No change |
| Overall width | 82 cm | 82 cm | No change |
| Weight capacity | ~135 kg | ~135 kg | No change |
The seat height does not change — both versions sit equally low. The key improvements in the Tall version are:
- Greater seat depth: Taller people have longer thighs. A deeper seat supports the full length of the thigh without the front edge cutting into the back of the knee — a common complaint from tall sitters in the standard model.
- Taller backrest: The extra height in the backrest means the lumbar section and shoulder section of the chair hit the right anatomical positions for a taller frame. In the standard model, a tall sitter’s lower back often sits unsupported against the transition between seat and backrest shells.
- More depth overall: The increased depth means the chair tilts the body into a more genuinely reclined position even for longer legs — the intended posture of the design.
Who Needs the Tall Version?
The Tall/XL version is most appropriate if:
- You are 185 cm (6’1″) or taller
- You have a long torso relative to your overall height
- You’ve sat in a standard Eames Lounge Chair and found the backrest doesn’t reach your shoulders
- You find the seat depth of standard lounge chairs too shallow (legs unsupported past mid-thigh)
At 185–190 cm, you may be comfortable in either version — it depends on how your height is distributed between torso and legs. If in doubt, the Tall version is the lower-risk choice: it works well for tall sitters and is not noticeably oversized for someone at the taller end of the standard range.
The Tall version is not recommended if you are under 175 cm. The deeper seat depth can cause the front edge to make contact with the back of shorter legs, and the taller backrest may push your body into an awkward forward lean.
Materials: What to Expect from a Quality Tall Replica
The Tall version uses the same materials as the standard, correctly. A quality Tall replica should have:
- Multi-layer molded plywood shells — the three-shell construction (headrest, backrest, seat) cold-pressed into compound curves. Not ABS plastic, not hollow MDF.
- Genuine wood veneer on both shell surfaces — walnut, palisander (rosewood), or ash. Not printed paper that mimics grain.
- Full-grain or semi-aniline leather cushions — not PU, not bonded leather. Cushions should be removable for future replacement.
- Die-cast aluminium five-star base — not chromed steel. The base should be matte-finished and heavy.
- Rubber shock mounts between the shells and connecting hardware — these prevent creaking and absorb flex.
A Tall replica that cuts corners on these materials is not a “tall version” of a quality chair — it is a taller version of a cheap chair, which is not the same thing.
Space Planning for the Tall Version
Because the Tall version is deeper, it needs more floor space than the standard. Plan as follows:
| Configuration | Required Depth (approx.) |
|---|---|
| Chair only (Tall), no wall clearance | ~96 cm |
| Chair (Tall) + 15 cm wall clearance | ~111 cm |
| Chair (Tall) + ottoman (standard) | ~148–165 cm |
| Width (both versions) | 82 cm |
| Swivel clearance (each side) | +15–20 cm recommended |
The ottoman for the Tall version is typically the same size as the standard ottoman (approximately 65 cm wide × 53 cm deep × 40–43 cm high). The chair ships in protective packaging; at 82 cm wide, navigating a standard EU interior doorway (80–90 cm) is tight. Flag any access restrictions at support@decomica.com before delivery.
Colour and Finish Options for the Tall Version
Quality Tall replicas are available in the same veneer and leather combinations as the standard model. The most common configurations:
- Walnut veneer / black leather
- Palisander veneer / black leather
- Palisander veneer / ivory leather
- Palisander veneer / antique brown leather
- White oak veneer / ivory leather
Availability varies. Some colour combinations sell out faster than others; if a specific combination matters to you, check current stock or contact support@decomica.com to ask about lead times or pre-order options.
Decomica’s Tall Eames Lounge Chair Replicas
Decomica offers Tall version Eames Lounge Chair reproductions with the same material standard as our standard models: molded plywood shells, genuine wood veneer on both sides, full-grain leather, die-cast aluminium base, rubber shock mounts. They ship free across the EU (excluding Bulgaria, Greece, Cyprus, and Malta), with:
- 1–2 working days dispatch
- 5–7 working days delivery via DPD (tracking by email and in your account)
- 2-year manufacturer’s warranty
- 14-day return window (defect: free DPD collection; change of mind: approximately €40–50 return shipping, original packaging required)
- Support by email at support@decomica.com or live chat — response within 24–48 hours
See available Tall configurations: Eames Lounge Chair collection at Decomica.
Frequently Asked Questions
What height is the Tall Eames Lounge Chair replica designed for?
The Tall version is designed for sitters approximately 185 cm (6’1″) and above. At 185–190 cm, either version may work depending on your torso-to-leg ratio. If you are above 190 cm, the Tall version is strongly recommended.
What are the key differences between the standard and Tall versions?
The Tall version has a deeper seat (~60–61 cm vs. ~54 cm), a taller backrest (~88–90 cm vs. ~82–84 cm), and more overall depth (~90–96 cm vs. ~82–85 cm). Width and seat height are the same in both versions.
Does the Tall version cost more?
Typically yes — slightly. The larger shells use more material and take more time to produce. The price difference varies by supplier but is generally €50–150 more than the equivalent standard model.
Can a shorter person use the Tall version?
It is not recommended for sitters under approximately 175 cm. The deeper seat may cause the edge to press uncomfortably against shorter legs, and the taller backrest can alter the intended seated posture for shorter frames.
